It is widespread that the replica watches crown will collapse, and sometimes the light train, and the table will be able to pull out entirely (entire head), especially in the old hours. Go for a clock at the desk for many reasons, such as: pull out the screws of the file screw, pull the hook tip or groove to wear a groove fake rolex, the main groove of the T-groove or part of the corresponding part of plywood dressing, etc., in short, can not be reliable to catch a very trough.
Cause and disposal of chairs for surveillance
This is a fairly common mistake in the replica watches, because clocks are the most commonly used parts of the replica watches; the problem is also called. But they are also divided into two types of situations: one is only the head of the table, the other table head together with the pole (pole) falls together. The preceding situation is often that the buckle on a chair or due to corrosion, as well as the effect of external forces caused by the break, is the latter case is more complicated, but generally speaking, because the clock moves, to pull the hook or not close to the channel itself, caused by The causes of failure include wear of the tire, pull out the tail of the hook of wear, pull out the loosening of the screw, deformation and damage, etc.
Early old fake watches are usually used to pull the screws on the table to fix the table, and now the main replica watches are used to pull the axis of the way to fix it, so many old-fashioned replica watches should pull out the screw caused by the release. Watching the handle of the rod is very easy to rust, the watch is used for prolonged use, the countertop wall is aging, which leads to poor sealing, because the first water consumption is the position of the table. The corrugated dining rod will be thinner at the root, the power drop; this is a kind of children’s table (in Rome and the United States and the usual United States Buy Rolex watches).
The so-called child is very well suited for the elements and has two sections of the table of the rod, they are between the elastic fit, the corrosion of the table will be a flexible rod down, so that it is easy to pull out (experiment or test, the table should apply 3KG force to pull, do not fall that Qualified). If the table falls, it should be kept properly. Do not miss it, and then send it to the repair shop on time to make repairs, and the best rods do not insert them in the table (if you really want to try re-installing it back, it should do a slow rotation, like the insert) do not repeat the insertion and pull-out, it can make the clutch wheel, as well as increase wear, so that future maintenance increases the problem.
Pull out the table with a needle, pay attention to being forced to light, parts of the clock are very small and thin. It can be said that the original conventional watches, as long as they vigorously use them to pull the table, can be pulled out, especially replicas relojes those small or small clocks, so we must pay particular attention to this problem.